THREE BOND OF AMERICA INC -- THREE BOND ANAEROBIC SEALANT TB1373B -- 8030-00N091222
=====================  Product Identification  =====================

Product ID:THREE BOND ANAEROBIC SEALANT TB1373B
MSDS Date:11/16/1995
FSC:8030
NIIN:00N091222
Status Code:A
MSDS Number: CJHRS
=== Responsible Party ===
Company Name:THREE BOND OF AMERICA INC
Address:20815 HIGGINS CT
City:TORRANCE
State:CA
ZIP:90501
Country:US
Info Phone Num:310-320-3342
Emergency Phone Num:(800)424-9300
Preparer's Name:K. KISHITA
Chemtrec Ind/Phone:(800)424-9300
CAGE:81449
=== Contractor Identification ===
Company Name:THREE BOND OF AMERICA INC
Address:20815 HIGGINS CT
Box:City:TORRANCE
State:CA
ZIP:90501
Country:US
Phone:310-320-3342
CAGE:81449

=============  Composition/Information on Ingredients  =============

Ingred Name:BISPHENOL A BIS(2-HYDROXYETHYL ETHER) DIMETHACRYLATE;
    (ETHOXYLATED BISPHENOL DOMETHACRYLATE)
CAS:24448-20-2
Minumum % Wt:98.
Maxumum % Wt:99.

Ingred Name:1,2,3,4-TETRAHYDROQUINOLINE; (TERTIARY AMINE)
CAS:635-46-1
Minumum % Wt:.5
Maxumum % Wt:2.

Ingred Name:HYDROPEROXIDE, ALPHA, ALPH-DIMETHYLBENZYL-;  (CATALYST)
CAS:80-15-9
RTECS #:MX2450000
Minumum % Wt:.5
Maxumum % Wt:2.
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SLIGHT SKIN IRRITANT (ALLERGIC
    SENSITIZER), EYE IRRITANT AND SKIN ABSORPTION HAZARD. CHRONIC: NO
    CHRONIC HEALTH DATA AVAILABLE.
Effects of Overexposure:EYE: EXPECTED TO CAUSE EYE IRRITATION. SKIN:
    EXPECTED TO BE A SKIN IRRITANT/ALLERGIC SENSITIZER.

=======================  First Aid Measures  =======================

First Aid:INGEST: CALL MD IMMEDIATELY. INHAL: REMOVE TO FRESH AIR.
    SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . EYE: IN
    CASE OF EYE CONTACT, IMMEDIATELY RINSE WITH CLEAN WATER FOR AT
    LEAST 20- 30 MINUTES. OBTAIN EMERGENCY MEDICAL ATTENTION. SKIN:
    REMOVE CONTAMINATED CLOTHING AS NEEDED. WASH SKIN THOROUGHLY WITH
    MILD SOAP/WATER.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:=93.3C, 200.F
Lower Limits:N/D
Upper Limits:N/D
Extinguishing Media:DRY CHEMICAL, WATER SPRAY, WATER FOG, CO*2, FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:COULD UNDERGO VIOLENT POLYMERIZATION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. EVACUATE
    THE AREA. RECOVER AS MUCH MATERIAL AS PRACTICAL. SOAK UP THE
    REMAINDER WITH ABSORBENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER CLOSED. KEEP AWAY FROM
    HEAT AND FLAMES. STORE IN A COOL AND DARK PLACE WHERE NO DIRECT
    SUNLIGHT.
Other Precautions:WARNING: CAUSES IRRITATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN . NO SPECIAL.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL):
    RECOMMENDED AT STORAGE. SPECIAL/OTHER: N/A.
Protective Gloves:PVA OR NEOPRENE GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH AND DELUGE SHOWER .
    APRON, BOOTS, HEAD AND FACE PROTECTION DEPENDING ON CONDITIONS.
Work Hygienic Practices:MEDICAL SURVEILLANCE AND EMPLOYEE TRAINING
    PROPOSED TO BE REQUIRED.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:N/D VERY HIGH
Melt/Freeze Pt:M.P/F.P Text:N/D
Vapor Pres:N/D VERY LOW
Vapor Density:N/D HVR
Spec Gravity:1.1 @ 25C (H*2O=1)
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORED LIQUID WITH A MUSTY ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AND REDUCING AGENTS.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:ACIDS AND NOXIOUS GASES.
Conditions to Avoid Polymerization:HEAT AND STRONG OXIDIZING AGENTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:MAY BE DISPOSED OF IN A LANDFILL IN ACCORDANCE
    WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

=====================  Regulatory Information  =====================

Federal Regulatory Information:(29 CFR 1910.1000. 40 FR 23072, MAY 28,
    1975: REVISED AT 54 FR 2332. JAN 19, 1989, EFFECTIVE MARCH 1,
    1989). INGREDIENTS IN INGREDIENT SECTION ARE NOT LISTED AS
    HAZARDOUS CHEMICALS.
State Regulatory Information:

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.