SIGMA CHEMICAL CO -- 1-10-PHENANTHROLINE MONOHYDRATE, P9375  -- 6810-00N085032
<pre>=====================  Product Identification  =====================

Product ID:1-10-PHENANTHROLINE MONOHYDRATE, P9375
MSDS Date:09/16/1992
FSC:6810
NIIN:00N085032
MSDS Number: CGVLN
=== Responsible Party ===
Company Name:SIGMA CHEMICAL CO
Box:14508
City:ST LOUIS
State:MO
ZIP:63178
Country:US
Info Phone Num:314-771-5765
Emergency Phone Num:314-771-5765
CAGE:21076
=== Contractor Identification ===
Company Name:SIGMA CHEMICAL COMPANY
Address:3050 SPRUCE ST
Box:14508
City:ST LOUIS
State:MO
ZIP:63178
Country:US
Phone:314-771-5765
CAGE:21076

=============  Composition/Information on Ingredients  =============

Ingred Name:1-10-PHENANTHROLINE, MONOHYDRATE
CAS:5144-89-8
RTECS #:SF8437000
Fraction by Wt: 100%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF SWALLOWED, INHALED OR
    ABSORBED THROUGH SKIN. MAY CAUSE IRRITATION. TO THE BEST OF
    MANUFACTURER'S KNOWLEDGE, THE CHMICAL, PHYSICAL AND TOXICOLOGICAL
    PROPERTIES HAVE NOT BEEN THOROUGHLY INVES TIGATED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES/SKIN: IN CASE OF CONTACT, IMMEDIATELY FLUSH EYES OR SKIN
    WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES WHILE
    REMOVING CONTAMINATED CLOTHING AND SHOES. INHAL: REMOVE TO FRESH
    AIR. IF NOT B REATHING GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS
    DIFFICULT, GIVE OXYGEN. INGEST: WASH OUT MOUTH WITH WATER PROVIDED
    PERSON IS CONSCIOUS. CALL MD. WASH CONTAMINATED CLOTHING BEFORE
    REUSE.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER SPRAY. CARBON DIOXIDE, DRY CHEMICAL POWDER OR
    APPROPRIATE FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR NIOSH APPROVED RESPIRATOR, CHEMICAL
    SAFETY GOGGLES, RUBBER BOOTS AND HEAVY RUBBER GLOVES. SWEEP UP,
    PLACE IN A BAG AND HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST.
    VENTILATE AREA AND WASH SPILL S ITE AFTER MATERIAL PICKUP IS
    COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:HARMFUL SOLID. KEEP TIGHTLY CLOSED.
    STORE IN A COOL, DRY PLACE.
Other Precautions:DO NOT BREATHE DUST. AVOID CONTACT WITH EYES, SKIN
    AND CLOTHING. AVOID PROLONGED OR REPEATED EXPOSURE. WASH THOROUGHLY
    AFTER HANDLING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR APPROPRIATE NIOSH APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:CHEMICAL-RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
    WEAR PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Appearance and Odor:WHITE CRYSTALLINE POWDER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF: CARBON MONOXIDE,
    CARBON DIOXIDE, NITROGEN OXIDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE
    SOLVENT AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN
    AFTERBURNER AND SCRUBBER. OBSERVE ALL FEDERAL, STATE AND LOCAL
    ENVIRONMENTAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.