JR2D INC -- THRIFT DRAIN CLEANER -- 6850-00N073596
=====================  Product Identification  =====================

Product ID:THRIFT DRAIN CLEANER
MSDS Date:08/24/1993
FSC:6850
NIIN:00N073596
MSDS Number: CCNXW
=== Responsible Party ===
Company Name:JR2D INC
Address:204 SOUTH JACKSON
City:LIVINGSTON
State:TX
ZIP:77351
Country:US
Info Phone Num:409-327-5723
Emergency Phone Num:800-255-3924
CAGE:JR2DX
=== Contractor Identification ===
Company Name:JR2D INC
Address:204 SOUTH JACKSON
Box:City:LIVINGSTON
State:TX
ZIP:77351
Country:US
Phone:409-327-5723
CAGE:JR2DX

=============  Composition/Information on Ingredients  =============

Ingred Name:SODIUM HYDROXIDE; (CAUSTIC SODA)  (CERCLA)
CAS:1310-73-2
RTECS #:WB4900000
Fraction by Wt: 99%
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3, C
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:CORROSIVE TO THE ENTIRE RESPIRATORY
    TRACT. BRIEF CONTACT TO THE EYES MAY CAUSE SEVERE DAMAGE. CAUSES
    RAPID BURNING AND SEVERE PAIN TO MOUTH, THROAT AND DIGESTIVE TRACT
    WHEN SWALLOWED, SOME EFFECTS MAY  BE DELAYED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:BURNING OF SKIN, EYES, MOUTH AND ETC.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
    RESP) . SKIN:FLOOD W/WATER FOR 15 MINUTES. EYES:FLUSH W/WATER FOR
    AT LEAST 15 MINUTES. INGEST:DRINK LARGE QUANTITIES OF WATER. CALL
    MD	IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE . THIS MATL IS
    NOT COMBUST. CONT W/WATER MAY GENERATE ENOUGH HEAT TO (SUPDAT)
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS MATL MELTS AT 590F. HOT MOLTEN MATLS
    WILL REACT VIOLENTLY W/WATER. IT WILL REACT W/METALS SUCH AS
    ALUMINUM, TIN & ZINC TO PRDCE FLAMM HYDROGEN GAS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR RUBBER BOOTS, RUBBER GLOVES & EYE
    GOGGLES. SWEEP UP & DISPOSE IN SEWAGE DRAIN - FOLLOW W/LOTS OF
    WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN DRY PLACE W/LID ON TIGHTLY.
    KEEP OUT OF THE REACH OF CHILDREN.
Other Precautions:KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA:IGNITE COMBUSTIBLE MATERIALS. EYE PROT:& FULL LENGTH
    FACESHIELD .

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:2530F,1388C
Melt/Freeze Pt:M.P/F.P Text:590F,310C
Vapor Pres:20
Vapor Density:1
Spec Gravity:2.13 (H*2O=1)
Solubility in Water:100%
Appearance and Odor:WHITE SOLID; NO ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACIDS, COMBUSTIBLE MATERIALS, ALUMINUM, TIN & ZINC.
Stability Condition to Avoid:KEEP WATER & MOIST AIR OUT OF THE
    CONTAINER.
Hazardous Decomposition Products:NONE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS . DISPOSE OF IN SEWAGE DRAIN FOLLOW W/LOTS OF WATER.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.