FISKE BROTHERS REFINING CO -- LUBRIPLATE SUPER HDS MOTOR OIL SAE 20-20W  -- 9150-00N067200
<pre>=====================  Product Identification  =====================

Product ID:LUBRIPLATE SUPER HDS MOTOR OIL SAE 20-20W
MSDS Date:11/01/1985
FSC:9150
NIIN:00N067200
MSDS Number: CBFNM
=== Responsible Party ===
Company Name:FISKE BROTHERS REFINING CO
Address:129 LOCKWOOD ST
City:NEWARK
State:NJ
ZIP:07105
Country:US
Info Phone Num:201-589-9150
Emergency Phone Num:201-589-9150
CAGE:9N579
=== Contractor Identification ===
Company Name:FISKE BROS REFINING CO
Address:129 LOCKWOOD ST
Box:City:NEWARK
State:NJ
ZIP:07105-4720
Country:US
Phone:201-589-9150
CAGE:73219
Company Name:FISKE BROTHERS REFINING CO
Address:1500 OAKDALE AVE
Box:City:TOLEDO
State:OH
ZIP:43605
Country:US
Phone:419-691-2491
CAGE:9N579

=============  Composition/Information on Ingredients  =============

Ingred Name:NON-HAZARDOUS INGREDIENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:PROLONGED OR REPEATED SKIN
    CONTACT MAY CAUSE SKIN IRRITATION. PRODUCT CONTACTING EYES MAY
    CAUSE EYE IRRITATION. HUMAN HEALTH RISKS VARY FROM PERSON TO
    PERSON. AS A PRECAUTION, EXPOSURE TO LIQUID S, VAPORS, MISTS AND
    FUMES SHOULD BE MINIMIZED. THIS PRODUCT HAS A LOW ORDER OF ACUTE
    ORAL TOXICITY. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:CHRONIC:NONE LISTED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/CLEAR WATER FOR @ LEAST 15 MINS OR UNTIL IRRIT
    SUBSIDES. IF IRRIT PERSISTS, CONSULT PHYS. SKIN:REMOVE ANY CONTAMD
    CLTHG & WASH THORO W/SOAP & WARM WATER. INHAL:VAPOR PRESS IS VERY
    LOW & IN HAL AT ROOM TEMP IS NOT A PROBLEM. IF OVERCOME BY VAPOR
    FROM HOT PROD, IMMED REMOVE FROM EXPOS & CALL PHYS. IF OVER-EXPOS
    TO OIL MIST, REMOVE FROM FURTHER EXPOS UNTIL EXCESS OIL MIST CNDTN
    (SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>425F,>218C
Lower Limits:1%
Upper Limits:7%
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE, OR WATERY
    SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . COOL EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:DO NOT STORE OR MIX WITH STRONG OXIDANTS.
    EMPTY CONTAINERS RETAIN RESIDUE. DO NOT CUT, DRILL, GRIND, OR WELD,
    AS THEY MAY EXPLODE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:COVER LIQUID, WASH REMAINDER WITH SUITABLE
    PETROLEUM SOLVENT OR ADD ABSORBENT. KEEP PETROLEUM PRODUCTS OUT OF
    SEWERS AND WATER COURSES. ADVISE AUTHORITIES IF PRODUCT HAS ENTERED
    OR MAY ENTER SEWERS AN D WATER COURSES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
    USE. DO NOT HANDLE OR STORE NEAR HEAT, SPARKS, FLAME OR STRONG
    OXIDANTS.
Other Precautions:AVOID BREATHING OIL MIST. REMOVE OIL-SOAKED CLOTHING
    AND LAUNDER BEFORE REUSE. CLEANSE SKIN THOROUGHLY AFTER CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY NEEDED. NIOSH/MSHA APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST:USE TO CAPTURE FUMES AND VAPORS.
Protective Gloves:OIL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:USE OIL-RESISTANT APRON, IF NEEDED. ANSI
    APPRVD EMERGENCY EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:SUBSIDES. INGEST:CALL PHYS IMMED.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>550F,>288C
Vapor Pres:<0.01
Vapor Density:>5
Spec Gravity:0.88 (H*2O=1)
Evaporation Rate &amp; Reference:<0.01 (N-BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSPARENT AMBER OIL WITH MINERAL OIL ODOR.
Percent Volatiles by Volume:NIL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDANTS LIKE LIQUID CHLORINE, CONCENTRATED
    OXYGEN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY FORM SO*2. IF INCOMPLETE
    COMBUSTION, CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ASSURE CONFORMITY WITH APPLICABLE FEDERAL, STATE
    AND LOCAL DISPOSAL REGULATIONS. DISPOSE OF ABSORBED MATERIAL AT AN
    APPROVED WASTE DISPOSAL FACILITY OR SITE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.