ADVANCED SAFETY SYSTEMS INC -- ADVANCED NON SLIP TILE & CONCRETE PREPARER  -- 6850-00F046794
<pre>=====================  Product Identification  =====================

Product ID:ADVANCED NON SLIP TILE & CONCRETE PREPARER
MSDS Date:11/08/1993
FSC:6850
NIIN:00F046794
MSDS Number: BYNNL
=== Responsible Party ===
Company Name:ADVANCED SAFETY SYSTEMS INC
Address:6834 S W 81 STREET
City:MIAMI
State:FL
ZIP:33143-7708
Country:US
Info Phone Num:305-666-9296/800-633-9296
Emergency Phone Num:800-633-9296/305-666-9296
CAGE:ADSSI
=== Contractor Identification ===
Company Name:ADVANCED SAFETY SYSTEMS INC
Address:6834 S W 81 STREET
City:MIAMI
State:FL
ZIP:33143-7708
Country:US
Phone:305-666-9296/800-633-9296
CAGE:ADSSI

=============  Composition/Information on Ingredients  =============

Ingred Name:AMMONIUM BIFLUORIDE SOLUTION

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: BURNS. SKIN: CAN CAUSE
    IRRITATION ESPECIALLY UNDER FINGER NAILS & TOE NAILS, CAN CAUSE A
    FLUORIDE-LIKE BURN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:BURNS, IRRITATION.

=======================  First Aid Measures  =======================

First Aid:SKIN: PROMPTLY WASH W/ALKALINE SOAP & WATER. EYES:
    IMMEDIATELY FLUSH W/WATER FOR 30 MINS. INHALATION:	REMOVE TO FRESH
    AIR, GIVE OXYGEN IF NEEDED. INGESTION: GIVE LARGE QUANTITIES OF
    MILK. OBTAIN MEDI CAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:FOAM, DRY CHEMICAL, CO2, WATER
Unusual Fire/Explosion Hazard:NOT A FIRE/EXPLOSION HAZARD, BUT MAY
    RELEASE HYDROFLUORIC ACID IF INVOLVED IN A FIRE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH W/WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE CLOSED IN COOL DRY AREA. WHEN
    HANDLING/POURING WEAR PROTECTIVE CLOTHING & RESPIRATORY PROTECTION.

=============  Exposure Controls/Personal Protection  =============

Ventilation:GOOD GENERAL MECHANICAL VENTILATION & LOCAL EXHAUST.
Protective Gloves:RUBBER/NEOPRENE
Eye Protection:SPLASH PROOF CHEMICAL GOGGLES
Work Hygienic Practices:MAINTAIN A SCHEDULE OF REGULAR HOUSEKEEPING TO
    INSURE CLEANLINESS IN THE WORK AREA.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>215F
Spec Gravity:1.2-1.4
Evaporation Rate &amp; Reference:LIKE WATER
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR W/SLIGHT PUNGENT ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, STRONG BASES
Stability Condition to Avoid:HIGH HEAT >644F
Hazardous Decomposition Products:HIGH HEAT >644F RELEASES HYDROGEN
    FLUORIDE, AMMONIA, STRONG ACIDS & INVOLVED INFIRE LIBERATES
    HYDROFLOURIC ACID.
Conditions to Avoid Polymerization:TEMP <40F, NONVENTILATED  AREAS,
    CONTACT W/PLASTICS & RUBBERS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:APPLY ABSORBENT MATERIAL. DISPOSE OF
    IAW/FEDERAL, STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.