MARK V LABORATORY INC -- DIAMOND PASTE WATERBASE, DPW2-1  -- 6850-00N043835
<pre>=====================  Product Identification  =====================

Product ID:DIAMOND PASTE WATERBASE, DPW2-1
MSDS Date:05/16/1991
FSC:6850
NIIN:00N043835
MSDS Number: BTGXQ
=== Responsible Party ===
Company Name:MARK V LABORATORY INC
Box:540
City:EAST GRANBY
State:CT
ZIP:06026-9720
Country:US
Info Phone Num:203-653-7201
Emergency Phone Num:203-653-7201
CAGE:6U350
=== Contractor Identification ===
Company Name:MARK V LABORATORY
Address:18 KRIPES RD
Box:City:EAST GRANBY
State:CT
ZIP:06026
Country:US
Phone:203-653-7201
CAGE:6U350

=============  Composition/Information on Ingredients  =============

Ingred Name:POLYALKYLENE GLYCOL
CAS:9038-95-3
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:POLYETHYLENE GLYCOL
CAS:25322-68-3
RTECS #:TQ3500000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:FATTY ACID ESTER 2; (FATTY ACID ESTER)
CAS:61791-00-2
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:COLLOIDAL SILICA
CAS:112945-52-5
RTECS #:VV7310000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:DIAMOND
CAS:7782-40-3
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL/INGEST: NO EVIDENCE OF
    ADVERSE EFFECTS. SKIN CONT & ABSORP: MAY CAUSE IRRITATION AND
    REDDENING. EYE: CAUSES MODERATE TO SEVERE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE TO FRESH AIR. INGEST: NO HARMFUL EFTS EXPECTED.
    CALL MD IMMED . SKIN: WASH WITH SOAP AND WATER. EYE: FLUSH THORO
    WITH WATER FOR AT LEAST 15 MINUTES. SEEK MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:200F,93C
Lower Limits:0.5%
Upper Limits:1.8%
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL SPILLS CAN BE FLUSHED WITH LARGE AMOUNTS
    OF WATER, LARGER SPILLS SHOULD BE COLLECTED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:WASH THOROUGHLY AFTER HANDLING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
    FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL: AVOID CONFINED SPACES. MECHANICAL (GENERAL): GENERAL
    FACTORY EXHAUST FAN.
Protective Gloves:PVC-COATED.
Eye Protection:ANSI APVD CHEMICAL SAFETY GOGGLES 
Other Protective Equipment:ANSI APVD EYE BATH AND SAFETY SHOWER
    AVAILABLE.
Work Hygienic Practices:WASH HANDS WITH SOAP AND WATER-AVOID SMOKING
    AND/OR OPEN FLAME.
Supplemental Safety and Health
MATLS TO AVOID: REACTIVE W/HYDROXYL COMPOUND.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:>350F,>177C
Vapor Pres:0.001@20C
Spec Gravity:0.991@20C
Solubility in Water:SOLUBLE
Appearance and Odor:TRANSLUCENT, LOW ODOR
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NORMALLY UNREACTIVE: HOWEVER AVOID STRONG BASES @ HIGH TEMPS, STRONG
    ACIDS, STRONG OXIDIZING AGENTS & MATLS (SUPP DATA)
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON DIOXIDE,
    CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN A FURNACE WHERE PERMITTED UNDER
    APPROPRIATE FEDERAL, STATE AND LOCAL REGULATION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.