CHEVRON -- CPS225001, DELO 400 MOTOR OIL SAE 10W  -- 9150-00N017400
<pre>=====================  Product Identification  =====================

Product ID:CPS225001, DELO 400 MOTOR OIL SAE 10W
MSDS Date:07/14/1989
FSC:9150
NIIN:00N017400
MSDS Number: BPJNM
=== Responsible Party ===
Company Name:CHEVRON
Box:4054
City:RICHMOND
State:CA
ZIP:94804
Country:US
Info Phone Num:800-532-3835
Emergency Phone Num:800-457-2022;800-424-9300(CHEMTREC)
CAGE:0AHD1
=== Contractor Identification ===
Company Name:CHEVRON ENVIRONMENTAL HEALTH CENTER INC
Address:15299 SAN PABLO AVE
Box:4054
City:RICHMOND
State:CA
ZIP:94804
Country:US
Phone:800-582-3835
CAGE:0AHD1

=============  Composition/Information on Ingredients  =============

Ingred Name:SOLVENT REFINED RESIDUM
CAS:64742-01-4

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED HEAVY
    NAPHTHENIC
CAS:64742-52-5
RTECS #:PY8035000

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED LIGHT
    NAPHTHENIC
CAS:64742-53-6
RTECS #:PY8036000

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED HEAVY
    PARAFFINIC
CAS:64742-54-7
RTECS #:PY8035500
OSHA PEL:300 PPM
ACGIH TLV:300 PPM

Ingred Name:SOLVENT,DEWAXED RESIDUAL OIL (PETROLEUM)
CAS:64742-62-7

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY
    PARAFFINIC
CAS:64742-65-0
RTECS #:PY8038500

Ingred Name:HYDROTREATED C25 BRIGHT STOCK BASED LUBRICATING OIL
CAS:72623-83-7

Ingred Name:ADDITIVES
Fraction by Wt: <20%

Ingred Name:ZINC DIALKYLDITHIOPHOSPHATE; (ZINC ALKYL DITHIOPHOSPHATE)
CAS:68649-42-3
Fraction by Wt: <2%

Ingred Name:CHEVRON DELO 400 MOTOR OIL SAE 10W. PEL/TLV AS OIL MIST.
    CONTAINING INGREDIENTS 2, 14 & 15.
RTECS #:9999999ZZ
Fraction by Wt: 100%
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3;10MG/M3 STEL

Ingred Name:LUBRICATING BASE OIL MIXTURE (CONTAINING INGREDIENTS 3-13)
RTECS #:9999999ZZ
Fraction by Wt: >80%

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED HEAVY
    PARAFFINIC
CAS:64741-88-4
RTECS #:PY8040500

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED LIGHT
    PARAFFINIC
CAS:64741-89-5
RTECS #:PY8041500

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED HEAVY
    NAPHTHENIC
CAS:64741-96-4
RTECS #:PY8040000

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED LIGHT
    NAPHTHENIC
CAS:64741-97-5
RTECS #:PY8041000
OSHA PEL:300 PPM
ACGIH TLV:300 PPM

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE/SKIN:SUBSTANCE NOT EXPECTED
    TO CAUSE PRLNGD/SIGNIFICANT IRRITATION. INHAL/INGEST: SYSTEMIC
    TOXICITY OF SUBSTANCE HAS NOT BEEN DETERMINED. HOWEVER, IT SHOULD
    BE PRACTICALLY NON-TOXIC TO INTER NAL ORGANS. CHRONIC:USED MOTOR
    OILS HAVE BEEN SHOWN TO CAUSE SKIN CANCER IN MICE FOLLOWING
    REPEATED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SOLVENT-REFINED LIGHT PARAFFINIC MINERAL
    OIL:GROUP 1 (IARC). DISTILLATES, HYDROTREATED KEROSENE:GROUP 2A
    (IARC).
Effects of Overexposure:HLTH HAZ:APPLICATION AND CONTINUOUS EXPOSURE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/FRESH WATER FOR AT LEAST 15 MIN. REMOVE CNTCT
    LENSES IF WORN. SKIN:WASH THORO W/SOAP & WATER. REMOVE & WASH
    CONTAMD CLTHG. INHAL:REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE
    O*2/ARTF RESP), CA LL MD . INGEST:GIVE WATER/MILK TODRINK & CALL
    MD. CALL MD BEFORE INDUCING VOMIT. IF MD NOT OBTAINED, TAKE PERS &
    PROD CNTNR TO NEAREST EMERGENCY TREATMENT CENTER OR HOSPITAL.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:401F,205C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM AND WATER FOG.
    READ ENTIRE MSDS & LABEL BEFORE USING PRODUCT.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . FOR FIRES INVOLVING MATL, DO NOT ENTER ANY
    ENCLOSED/CONFINED FIRE SPACE W/OUT PROT EQUIP.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NOT EXPECTED TO PRESENT ANY ENVIRONMENTAL
    PROBLEMS OTHER THAN THOSE ASSOC W/OIL SPILLS. STOP SOURCE OF
    LEAK/RELEASE. CLEAN UP AS SOON AS POSS. CONTAIN LIQ TO PVNT FURTHER
    CONTAM OF SOIL, SURF WATER/GR OUNDWATER. CLEAN UP SMALL SPILLS
    USING (SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT WELD, HEAT OR DRILL CONTAINER.
    RESIDUE MAY IGNITE W/EXPLOSIVE VIOLENCE IF HEATED SUFFICIENTLY.
Other Precautions:CAUTION! DO NOT USE PRESSURE TO EMPTY DRUM OR
    EXPLOSION MAY RESULT. AVOID PROLONGED OR FREQUENTLY REPEATED SKIN
    CONTACT W/MATERIAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NO SPECIAL RESPIRATORY PROTECTION NORMALLY
    REQUIRED. HOWEVER, IF OPERATING CONDITIONS CREATE AIRBORNE
    CONCENTRATIONS WHICH EXCEED RECOMMENDED EXPOSURE STANDARDS, USE OF
    A NIOSH/MSHA APPROVED RESPIRATO R IS REQUIRED.
Ventilation:USE ADEQUATE VENTILATION TO KEEP AIRBORNE CONCENTRATIONS OF
    MATERIAL BELOW RECOMMENDED EXPOSURE STANDARD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SKIN CONTACT CAN BE MINIMIZED BY WEARING
    PROTECTIVE CLOTHING.
Work Hygienic Practices:THOROUGHLY REMOVE OIL BY WASHING W/SOAP &
    WATER.
Supplemental Safety and Health
SPILL PROC:APPROPRIATE TECHNIQUES SUCH AS SORBENT MATERIALS OR PUMPING.
    WHERE FEASIBLE AND APPROPRIATE, REMOVE CONTAMINATED SOIL. FOLLOW
    PRESCRIBED PROCEDURES FOR REPORTING AND RESPONDING TO LARGER RE
    LEASES.

==================  Physical/Chemical Properties  ==================

Spec Gravity:0.88@15.6/15.6C
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK BROWN LIQUID

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MAY REACT W/STRONG OXIDIZING AGENTS, SUCH AS CHLORATES, NITRATES,
    PEROXIDES, ETC.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL COMBUSTION FORMS CO*2, WATER
    VAP & MAY PRDCE SO*X, NO*X AND PO*X. INCOMPLETE COMBUSTION CAN
    PRDCE CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PLACE CONTAMINATED MATERIALS IN DISPOSABLE
    CONTAINERS & DISPOSE OF IN A MANNER CONSISTENT W/APPLICABLE
    REGULATIONS. CONTACT LOCAL, STATE AND FEDERAL ENVIRONMENTAL/HEALTH
    AUTHORITIES FOR APPROVED DISPO SAL OF THIS MATERIAL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.