FARWEST PAINT MFG CO -- WHITE SEMI-GLOSS ENAMEL OIL BASE EXTERIOR  -- 8010-00-028-8629
<pre>=====================  Product Identification  =====================

Product ID:WHITE SEMI-GLOSS ENAMEL OIL BASE EXTERIOR
MSDS Date:02/09/1989
FSC:8010
NIIN:00-028-8629
MSDS Number: BJZRM
=== Responsible Party ===
Company Name:FARWEST PAINT MFG CO
Address:4522 S 133 ST
City:TUKWILA
State:WA
ZIP:98168
Country:US
Info Phone Num:206-244-8844
Emergency Phone Num:206-941-1619
CAGE:6F266
=== Contractor Identification ===
Company Name:FARWEST PAINT MANUFACTURING CO
Address:4522 SOUTH 133RD ST
Box:City:TUKWILA
State:WA
ZIP:98168
Country:US
Phone:206-244-8844
CAGE:6F266

=============  Composition/Information on Ingredients  =============

Ingred Name:ALIPHATIC HYDROCARBON (VAPOR PRESSURE 2.0 MM HG @ 68 F)
    (SOLVENT)
Fraction by Wt: 43-48%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Ingred Name:METAL SOAP DRIERS (VAPOR PRESSURE 1.0 MM HG @ 68 F)
    (ADDITIVE)
Fraction by Wt: <2.00%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Ingred Name:OTHERS (ADDITIVES)
Fraction by Wt: <0.25%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Health Hazards Acute and Chronic:EYES: SEVERE IRRITATION. SKIN:
    PROLONGED OR REPEATED CONTACT CAN CAUSE MODERATE IRRITATION,
    DEFATTING, DERMATITIS. BREATHING: EXCESSIVE INHALATION OF VAPORS
    CAN CAUSE NASAL & RESPIRATORY IRRITATION. S WALLOWING:
    GASTROINTESTINAL IRRITATION.ASPIRATION OF MATERIAL INTO LUNGS CAN
    CAUSE CHEMICAL PNEUMONITIS/CAN BE FATAL.
Effects of Overexposure:EYES: REDNESS, TEARING, BLURRED VISION.
    BREATHING: DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE, POSSIBLE
    UNCONSCIOUSNESS AND EVEN ASPHYXIATION. SWALLOWING: NAUSEA, VOMITING
    AND DIARRHEA.

=======================  First Aid Measures  =======================

First Aid:SKIN: THOROUGHLY WASH EXPOSED AREA W/SOAP & WATER. REMOVE
    CONTAMINATED CLOTHING. LAUNDER BEFORE REUSE. EYES: FLUSH W/ LARGE
    AMOUNTS WATER LIFTING UPPER & LOWER LIDS OCCASIONALLY. GET MEDICAL
    ATTN. SWA LLOWING: DO NOT INDUCE VOMITING. KEEP WARM & QUIET. GET
    MEDICAL ATTN. INHALE: REMOVE TO FRESH AIR. IF BREATHING DIFFICULT,
    GIVE OXYGEN. IF BREATHING STOPPED, GIVE CPR. KEEP QUIET & GET
    MEDICAL ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:100F,38C
Lower Limits:1.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS WITH A FULL
    FACEPIECE OPERATED IN PRESSURE-DEMAND OR OTHER POSITIVE PRESSURE
    MODE.
Unusual Fire/Explosion Hazard:NEVER USE NEAR OR AROUND WELDERS OR
    CUTTING TORCHES BECAUSE PRODUCT (EVEN RESIDUE) OF EMPTY DRUM CAN
    IGNITE EXPLOSIVELY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB LIQUID ON ABSORBENT MAT'L/TRANSFER TO
    HOOD. ELIMINATE IGNITE SOURCES. EXCLUDE PERSONS NOT WEARING
    PROTECTIVE EQUIPMENT UNTIL CLEAN-UP COMPLETED. STOP SPILL AT
    SOURCE, DIKE AREA, PUMP LIQUID TO  SALVAGE TANK. PREVENT RUN-OFF TO
    SEWERS, STREAMS,
Neutralizing Agent:N/K OTHER BODIES OF WATER. NOTIFY AUTHORITIES AS
    REQUIRED THAT SPILL OCCURED.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CONTAINERS OF THIS MATERIAL MAY BE
    HAZARDOUS WHEN EMPTIED. SINCE EMPTIED CONAINTERS RETAIN PRODUCT
    RESIDUES, OBSERVE ALL HAZARDS GIVEN IN DATA SHEET.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF TLV OF PRODUCT OR ANY COMPONENT IS EXCEEDED,
    NIOSH/MSHA JOINTLY APPROVED AIR SUPPLIED RESPIRATOR IS ADVISED IN
    ABSENCE OF PROPER ENVIRONMENTAL CONTROL. IMPLEMENT ENGINEERING OR
    ADMINISTRATIVE CONTR OLS TO REDUCE EXPOSURE.
Ventilation:PROVIDE SUFFICIENT MECHANICAL(GENERAL AND/OR LOCAL EXHAUST)
    VENTILATION TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:NITRILE RUBBER
Eye Protection:CHEMICAL SPLASH GOGGLES, SAFETY GLASSES.
Other Protective Equipment:TO PREVENT REPEATED OR PROLONGED SKIN
    CONTACT, WEAR IMPERVIOUS CLOTHING AND BOOTS.
Work Hygienic Practices:KEEP WORK AREA CLEAN & FREE OF LEAKS/SPILLS.
    ALWAYS WASH HANDS THOROUGHLY W/SOAP & WATER BEFORE HANDLING FOOD
    AND DRINK.
Supplemental Safety and Health
OSHA REGULATIONS ALSO PERMIT OTHER NIOSH/ MSHA RESPIRATORS UNDER
    SPECIFIED CONDITIONS.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:300F,149C
Vapor Density:> THAN AIR
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:WHITE LIQUID WITH MILD, SWEET AROMATIC ODOR.
Percent Volatiles by Volume:46

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP AWAY FROM OPEN FLAMES, SPARKS AND
    HEAT. DO NOT WELD NEAR OR AROUND.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DESTROY BY LIQUID INCINERATION. CONTAMINATED
    ABSORBENT MAY BE DEPOSITED IN A LANDFILL IN ACCORDANCE WITH LOCAL,
    STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.