E. I. DUPONT DE NEMOURS COMPANY -- FREON TF SOLVENT;FREON PCA  -- 6850-00-984-5853
<pre>=====================  Product Identification  =====================

Product ID:FREON TF SOLVENT;FREON PCA
MSDS Date:10/01/1985
FSC:6850
NIIN:00-984-5853
MSDS Number: BGBNM
=== Responsible Party ===
Company Name:E. I. DUPONT DE NEMOURS COMPANY
Address:FREON PRODUCTS DIVISION
Box:WILMIN
City:WILMINGTON
State:DE
ZIP:19898
Country:US
Info Phone Num:302-774-2421
Emergency Phone Num:302-774-2421
Preparer's Name:T.D.ARMSTRONG,C&P DEPT
CAGE:73925
=== Contractor Identification ===
Company Name:DU PONT E I  DE NEMOURS AND CO INC   PETROCHEMICALS DEPT
Address:1251 BRANDYWINE BLDG
Box:City:WILMINGTON
State:DE
ZIP:19898
Phone:302-773-5676
CAGE:73925

=============  Composition/Information on Ingredients  =============

Ingred Name:1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE (FREON 113)  (SARA
    III)
CAS:76-13-1
RTECS #:KJ4000000
Fraction by Wt: 100%
OSHA PEL:1000PPM/1250STEL
ACGIH TLV:1000PPM/1250STEL9192
Ozone Depleting Chemical:1

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LC 50 RATS 52,000 PPM/4HRS
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:SUFFOCATION,LIGHT
    HEADACHE,GIDDINESS,NARCOSIS,CARDIAC
    IRREGULARITIES;SKIN:IRRITATION;EYES:DISCOMFORT. CHRONIC:DEFAT OR
    DERMATITIS;CARDIOVASCULAR DISEASE.
Effects of Overexposure:LIGHT-HEAD,GIDDY,SHORT OF BRTH,POSSIBL
    NARCOSIS,POSSIBLE CARDIAC ARRHYTHNIAS AT HIGH CONCENTTATIONS.

=======================  First Aid Measures  =======================

First Aid:DO NOT GIVE EPINEPHRINE OR SIMILAR DRUGS.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:EXTINQUISH W. AGENT SUITABLE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP IF INVOLVED IN FIRE.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA.ELIMINATE IGNITION
    SOURCES,ESPECIALLY LOW AREAS WHERE VAPORS MIGHT COLLECT.STOP
    LEAK.WEAR PROTECTIVE CLOTHES,SCBA.ABSORB SM SPILL WITH SUITABLE
    ABSORBENT.SHOVEL INTO CONTAINER.LQ SPILL: DIKE WITH SUITABLE
    ABSORBENT FOR LATER DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN CLEAN,DRY WELL VENTED
    AREA.KEEP CONTAINERS CLOSED.PROTECT FROM PHYSICAL DAMAGE.DO NOT
    STORE ABOVE 125F.
Other Precautions:FOR FURTHER INFORMATIONS,SEE FREON PRODUCTS BULLETIN
    S-16,FST-1,S-24,S-30.

=============  Exposure Controls/Personal Protection  =============

Ventilation:MECHAN. IN LOW PLACES;LOCAL EXHAUST WHEN LARGE AMTS
    RELEASED
Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:USE APPROPIATE HYGIENE PRACTICES.
Supplemental Safety and Health
MATERIAL MEETS REQUIREMENTS FOR TYPE I UNDER MIL-C-81302.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:118F/48C
Vapor Pres:334
Vapor Density:6.5
Spec Gravity:1.57
pH:NEUTRL
Evaporation Rate &amp; Reference:0.1  (CCL*4=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS LIQUIDS-SLIGHT ETHEREAL ODOR.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ALKALI OR ALKALINE EARTH METALS POWDERED AL,ZN,BE,ETC.
Stability Condition to Avoid:HIGH TEMPERATURES,IGNITION SOURCES
Hazardous Decomposition Products:HYDROCHLORIC & HYDROFLUORIC
    ACIDS-POSSIBLE CARBONYL HALIDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ELIMINATE IGNITION SOURCES.CONTACT QUALIFIED
    DISPOSAL CONTRACTOR OR MANUFACTURER FOR DISPOSAL METHODS.SEND TO
    MFR/DISPOSAL CONTRACTOR FOR RECYCLE BY DISTILLATION.PACKAGE &
    DISPOSE IN ACCORDANCE WITH L OCAL,STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.