PRATT & LAMBERT, INC.-INDUSTRIAL COATINGS DIV. -- PRIMER COATING, EPOXY 724116  -- 8010-00-082-1714
<pre>=====================  Product Identification  =====================

Product ID:PRIMER COATING, EPOXY 724116
MSDS Date:02/17/1988
FSC:8010
NIIN:00-082-1714
Kit Part:Y
MSDS Number: BCXXN
=== Responsible Party ===
Company Name:PRATT & LAMBERT, INC.-INDUSTRIAL COATINGS DIV.
Address:16116 E 13TH ST
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
CAGE:FO127
=== Contractor Identification ===
Company Name:PRATT & LAMBERT, INC/BUFFALO, NY 14240
Box:22
CAGE:FO127
Company Name:PRATT AND LAMBERT INC
Address:Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196

=============  Composition/Information on Ingredients  =============

Ingred Name:PROPYLENE GLYCOL MONOMETHYL ETHER
CAS:107-98-2
RTECS #:UB7700000
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192

Ingred Name:XYLENES (O-,M-,P- ISOMERS)	(SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:N-BUTYL ALCOHOL  (SARA III)
CAS:71-36-3
RTECS #:EO1400000
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:REPORTS HAVE ASSOCIATE PROLONGED AND
    REPEATED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN
    AND NERVOUS SYSTEM DAMAGE. OVEREXPOSURE TO XYLENE MAY CAUSE INJURY
    TO THE LIVER, KIDNEYS AND BL OOD. REPEATED CONTACT MAY CAUSE
    DERMATITIS.
Effects of Overexposure:SWALLOW-GASTROINTESTINAL IRRITATION, NAUSEA AND
    VOMITING. ASPIRATION OF MATERIAL INTO THE LUNGS CAN CAUSE CHEMICAL
    PNEUMONITIS WHICH CAN BE FATAL. INHALE-MAY CAUSE NOSE OR THROAT
    IRRITATION. EYE-MAY C AUSE SEVERE EYE IRRITATION. SKIN-MAY CAUSE
    DEFATTING AND IRRITATION OF THE SKIN. MAY CAUSE SKIN SENSITIZATION.

=======================  First Aid Measures  =======================

First Aid:IF SWALLOWED, CALL POISON CONTROL CENTER, HOSPITAL EMERGENCY
    ROOM OR MD IMMED. INHALED, REMOVE TO FRESH AIR IMMED. IF BREATHING
    HAS STOPPED, GIVE ARTIFICIAL RESPIRATION. KEEP WARM AND QUIET. GET
    MED A TTN IMMED. EYE, FLUSH WITH LARGE AMTS OF WATER AT LEAST 15
    MIN. GET MED ATTN IMMED. SKIN, WASH AFFECTED AREA WITH SOAP &
    WATER. REMOVE CONTAMINATED CLOTHING. GET MED ATTN IF IRRITATION
    PERSISTS.

=====================  Fire Fighting Measures  =====================

Flash Point:80F-27C
Extinguishing Media:NFPA CLASS B FIRE EXTINGUISHER DESIGNED TO
    EXTINGUISH FLAMMABLE LIQUID FIRES. POLYMER FOAM PREFERRED FOR LARGE
    FIRES.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. WATER
    MAY BE INEFFECTIVE, BUT MAY BE USED TO PREVENT PRESSURE BUILD-UP.
    IF WATER IS USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:DURING EMERGENCY CONDITIONS, OVEREXPOSURE
    TO DECOMPOSITION PRODUCTS MAY CAUSE A HEALTH HAZARD. OBTAIN MEDICAL
    ATTENTION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:KEEP SPECTATORS AWAY. ELIM ALL IGNITION
    SOURCES. DIKE & CONTN SPILL WITH INERT MATL. TR LQDS TO COV MTL
    CNTNR FOR RECOV OR DISP OR REM W/INERT ABSORB.USE NON-SPRKG
    TOOLS.PLACE ABSORB MAT IN COV METAL  CONTNR FOR DISP. PREVENT
    CONTAM OF SEW,STRMS,ETC

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 90 DEGREES F.
Other Precautions:DO NOT TAKE INTERNALLY.CLOSE CONTAINER AFTER EACH
    USE.KEEP AWAY FROM CHILDREN. AVOID SKIN CONTACT.EMPTY CONTAINERS
    MUST NOT BE WASH & REUSED FOR ANY PURPOSE. NEVER USE PRESSURE TO
    EMPTY. DO NOT WELD,  BRAZE OR CUT ON EMPTY CONTAINER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WELL-VENTILATED AREA-NIOSH APPROVED MECHANICAL
    FILTER RESPIRATOR TO REMOVE OVERSPRAY.RESTRICTED AREA-NIOSH
    APPROVED PAINT SPRAY RESPIRATOR TO REMOVE SPRAY MIST AND ORGANIC
    VAPORS.CONFINED AREA-NIOSH A PPROVED AIR-SUPPLIED RESPIRATOR.
Ventilation:PROVIDE GENERAL DILUTION & LOCAL EXHAUST VENTILATION IN
    SUFFICIENT VOL & PATTERN TO MAINTAIN BELOW LOWEST EXPOS LIMITS.
Protective Gloves:SOLVENT IMPERMEABLE GLOVES
Eye Protection:WEAR SAFETY SPECTACLES
Other Protective Equipment:EYEWASH FACILITY, SAFETY SHOWER
Supplemental Safety and Health
SOLVENT IMPERMEABLE GLOVES REQUIRED FOR REPEATED PROLONGED CONTACT PART
    B OF TWO PART PRODUCT SEE P/N FOR PART A KEY1:F4

==================  Physical/Chemical Properties  ==================

HCC:F3
Boiling Pt:B.P. Text:243F-293F
Vapor Pres:11
Vapor Density:>AIR
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:81

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS. OXIDIZING MATERIALS.ACCELERATORS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
    IGNITION. ALSO, THE ADDITION OF EXCESS HARDENER.
Hazardous Decomposition Products:BURNING, INCLUDING WHEN HEATED BY
    WELDING OR CUTTING, WILL PRODUCE SMOKE, CARBON MONOXIDE AND CARBON
    DIOXIDE.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT, SPARKS AND
    FLAME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:IAW FED, STATE & LOCAL LAWS. INCINERATE ONLY IN
    EPA PERMITTED FACILITY. DO NOT INCINERATE CLOSED CONTAINERS.
    OBSERVE PRECAUTIONS FOR DISPOSAL OF FLAMMABLE MATERIALS.
    CONTAMINATED ABSORBANT MAY BE DISP OSED IN A HAZARDOUS WASTE
    LANDFILL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.