ASHLAND CHEMICAL CO. -- FREON TE,690LB  -- 6810-00K000310
<pre>=====================  Product Identification  =====================

Product ID:FREON TE,690LB
MSDS Date:01/01/1985
FSC:6810
NIIN:00K000310
MSDS Number: BBZTB
=== Responsible Party ===
Company Name:ASHLAND CHEMICAL CO.
Emergency Phone Num:606-324-1133
CAGE:5A188
=== Contractor Identification ===
Company Name:ASHLAND CHEMICAL CO
Address:5200 PAUL BLAZEL MEMORIAL PARKWAY
Box:City:DUBLIN
State:OH
ZIP:43017
Country:US
Phone:614-889-4505
CAGE:5A188

=============  Composition/Information on Ingredients  =============

Ingred Name:1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE (FREON 113)  (SARA
    III)
CAS:76-13-1
RTECS #:KJ4000000
Fraction by Wt: 95.5%
OSHA PEL:1000PPM/1250STEL
ACGIH TLV:1000PPM/1250STEL9192
Ozone Depleting Chemical:1

Ingred Name:METHYL ALCOHOL (METHANOL)  (SARA III)
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: 4.1%
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ETHYL ALCOHOL (ETHANOL)
CAS:64-17-5
RTECS #:KQ6300000
Fraction by Wt: 0.4%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM; 9192

=====================  Hazards Identification  =====================

Effects of Overexposure:EYES:IRRITATES;SKIN: IRRITATES ON
    PROLNG/REPEATED EXPOS.; INHAL: NAUSEA,RESPIRATORY IRRITAT.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/LARGE AMTS. OF WATER.GET MEDICAL ATTN.; SKIN:
    WASH EXPOSED AREA W/SOAP & WATER.REMOVE CONTAMINATED CLOTHING.;
    INGEST: GIVE 2 GLASSES OF WATER.INDUCE VOMITING IMMEDIATELY;
    INHAL:REMOVE TO  FRESH AIR. DONOT GIVE STIMULANTS.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER FOG
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING EQUIP. W/FUL-FACE
    PIECE IN TPRE

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL SPILL:ABSORB LIQUID ON
    PAPER,VERMICULITE,FLOOR ABSORBENT,OR OTHER ABSORBENT WATER MATERIAL
    AND TRANSFER TO HOOD;LARGE SPILL: STOP SPILL AT SOURCE, DIKE SPILL
    AREA TO PREVENT SPREADING , PUMP LIQ UID, TO SALVAGE TANK.

======================	Handling and Storage  ======================

Handling and Storage Precautions:EMPTY CONTAINERS MAY BE HAZ. SINCE
    PRODUCT RESIDUE PRESENT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED AIR-SUPPLIED RESPIRAT. WHEN
    TLV EXCEEDED.
Ventilation:SUFFICIENT TO MAINTAIN EXPOSURE BELOW TLV
Protective Gloves:POLYVINYL ALLOH
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING & BOOTS TO AVOID
    SKIN CONTACT
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:112 F/44.4C
Vapor Pres:362
Vapor Density:2.9
Spec Gravity:1.51
Evaporation Rate &amp; Reference:(CARBON TET =1) 40
Percent Volatiles by Volume:>95

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID POWDERED METALS,STRONG OXIDIZING AGENTS;
Hazardous Decomposition Products:HYDROGEN CHLORIDE,PHOSGENE,HYDROGEN
    FLUORIDE,CO*2, & CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:SMALL SPILL:EVAPORATE VOLATILE PORTION IN HOOD.
    ALLOW SUFFICIENT TIME FOR VAPORS TO COMPLETELY CLEAR HOOD DUCT
    WORK.DESTROY REMAINING MATERIAL BY BURNING IN AN IRON PAN; LARGE
    SPILL:USE LIQUID INCINER ATION W/OFF-GAS SCRUBBER.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.